Bluekey Speaker Model 1
OVERVIEW
Bluekey Acoustics Model 1 is designed to deliver high efficiency, bass extension, and great dynamics all in a relatively small-sized speaker for its category. To achieve this engaging sound, Model 1 uses a powerful 15-inch woofer to produce the best transient response from 35 Hz up to the crossover point, where a 1.7-inch titanium diaphragm compression driver extends the mid and high frequencies up to 21 KHz.
Combined with the compression driver, there is a state-of-the-art studio recording horn that produces the most balanced and smooth response throughout the mid and high frequencies range.
Complete with dual firing front ports, this two-way is room-friendly allowing the speaker to be placed close to the front wall. All of this was carefully chosen to deliver an exceptional audio experience.
Speaker
Specifications
| SPEAKER TYPE | 2-Way horn loaded speaker |
| LOW-FREQUENCY TRANSDUCER | 15” (380mm) paper cone woofer, 4” (100mm) voice coil diameter |
| MID/HIGH FREQUENCY TRANSDUCER | 1.7” (44mm) Titanium diaphragm compression driver |
| RECOMMENDED AMPLIFIER POWER | 8 - 300 watts RMS |
| FREQUENCY RESPONSE (+/-3dB) | 35Hz-21KHz |
| SENSITIVITY (2.83V@1M) | 93 dB |
| NOMINAL IMPEDANCE | 10 Ohms, 8 Ohms minimum at 130 Hz, 5 Ohms minimum at 21 KHz |
| ENCLOSURE TYPE | Bass-reflex vial Dual Front-firing Ports |
| INPUTS | Dual Gold-plated Binding Posts |
| DIMENSIONS (HxWxD) | 34-5/8” x 19-3/4” x 13-3/8” (88cm x 50cm x 34) |
| WEIGHT | 99 lb (45 Kg) each |
| FINISH | Walnut Veneer (Other finishes available upon request) |